Desktop milling machine CNC

let me Remind You that a desktop milling machine with CNC is a reduced copy of a large machine, and in principle, it performs the same function and has an identical design. Desktop milling machines CNC have a size of less 910х880х880. Thanks to its compactness, these milling machines can be installed in a domestic environment, for example at the cottage, garage or even in the shop for the production and sale of Souvenirs.

table milling machine

Requirements ostolnom milling machine

Usually a power of such a milling machine for the house takes from the usual outlets 220 volts. The spindle power of 0.7 kW and 1.5 kW allows to process plastic, wood or soft metals (copper, aluminium and brass).

table milling machine

Desktop milling machines equipped with numerical control (CNC) enables to manage their work using a computer or, depending on configuration and DSP controller, which makes the operation easier, more accurate and safer.

Height of working area of table milling machines in the range of 40 — 210 mm. This height limits the thickness of the workpiece.

depending on Your requirements table milling machines are equipped with additional options

the Spindle with high power up to 2.5 kilowatts — for processing difficult to machine materials

Straicases for chip removal from the cutting zone

the System of water or air cooling spindle – for increased service life and higher stability.

Rotary device — for conical parts

desktop milling CNC machine

the Turning device in this case is connected to the driver of one of the two coordinate axes of milling machine X or Y, and the cutter goes on one coordinate, and the rotary device is sandwiched between the attendants billet progressively rotates, allowing you to make the product a rounded shape.

the Scope of a desktop milling machine with CNC is very wide, in addition to milling, it can work as a drilling machine or as accurate and reliable engraver for a variety of images and inscriptions on metal chips or plaques, Souvenirs made of wood or plastic.

desktop milling machine for difficult materials

For example, give a couple table milling machine table

table milling machine series KX from the Sieg KX1 has the following features

-Direct drive NEMA 23
-3x stepper Drivers for main axes (X, Y)
-Variable spindle speed under full CNC control
-the Toothed belt drive spindle

table milling machine

Milling machine for home Bravoprodigy BE3030 has the following features

is the spindle Motor DC Motor 80 watts
spindle Speed 0..17000 about./min
USB Interface
-noise Level In the rest of 39.6 dB(A)
-noise Level Without load less than 66 dB(A) Without load less than 66 dB(A)

table milling machine

Machining on the milling machine table

the Cost of these table milling mill about 175 000 RUB.

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *