In this article we consider the purpose of grooving cutters and their applications. Of course, from the name of the mill is clear that it is intended primarily to produce a groove or a groove of such width and depth that you require. Next, we’ll look at that mill in detail.< / span>

so, besides the fact that the slot milling cutter it is possible to obtain grooves, so also is the ability to change the width of the groove by controlling the installation stops milling machine during the work, and not replacing the cutter to the other, having the larger diameter.

it Should be noted that the slot milling cutter is used for making tongue and groove connection.

grooving Cutter with brazed plate based hard alloy.

Adjustable width.

its Main purpose, of course, machining grooves in the wood (hard and soft wood).This mill can process wood, in this case, to obtain a groove, we can this cutter to mill a as along and across the grain. The high quality of the groove contribute to the clipping teeth. Spacing washers or nuts to allow adjustment of the cutter.

Cutter slot, which has carbide knives and cuts are attached mechanically.

 

 

basically, this mill is processing of wood (hard and soft wood). Most often, it is possible to the eye.

Cutter slot, which has carbide knives and cuts are attached mechanically.

Adjustable width.

This cutter has found its application in the field of processing of wood (hard and soft wood). Of course, she is getting the slots. There is a possibility to perform milling as along the grain and across. The high quality of the groove contribute to the clipping teeth. And due to the fact that the knife can be deployed tangentially to 10 degrees, ensures the smooth operation of the mills. Thumbwheel control of the cutter.

Next, let’s talk about the disk grooving mills, as often used in production.

so first of all, for milling grooves are applied one-piece disc cutter, which are divided into several types. Distinguish:

interlocking disk milling cutter;

relief grooving disk milling cutter;

interlocking disk milling cutter with straight teeth triangular;

interlocking disk milling cutter with triangular divergent teeth that can be small or normal.

Feature of disk grooving cutters — the presence of teeth on certain parts of the surface, namely, cylindrical. In General, such cutters milled shallow slots.

are most Often used for making slots of a tripartite disc cutters. With regards to the teeth, the cylindrical surface and the ends are equipped with them. Found a use for milling slots. But it’s worth noting that with these cutters you can get deeper grooves. The side walls of grooves or ledges have a higher class of roughness due to the processing of such cutters. Improvement of cutting conditions contributes to the supply of milling cutters with teeth inclined, and they alternate directions of the grooves.

the Essence of all that due to the fact that the inclination of the teeth alternates, is the balancing of axial components of cutting forces. The main drawback of the above-described cutters the first regrinding the end face leads to the reduction of width dimension.

Perhaps the most difficult task is to choose the right milling cutter for milling groove. To do this, you must first start from the material and its thickness. Also, consider how accurate you need to groove.