These cutters are for carbide tools, and represent a body of rotation with the cutting teeth. They are another example of the unification processing. Apply to the processing of a single step shaped surfaces, which constitute a decorative pattern on the pieces of wood and stone.

Profile cutting completely identical get the form processing. In cross section it consists of interconnected poludov and direct angles to the plane of the workpiece. Incisors have a sharp edged blade at an angle of 30 or 60 degrees.

 

Are solid teams. In the first case, the teeth along the entire length of the working part are made continuous, and the second, for each segment of the pattern is chosen its mill.

Known disc and end versions of the shank. The disk teeth are positioned in the middle of the tool and is mounted on the two sides. In the end fastened with one end of the cutter, and the teeth are at the other end of the cutter.

 

the Disadvantage of this type of tool is the difficulty of manufacture and subsequent maintenance. For example, the cutters in the form of a semicircle are difficult to sharpen.

 

of the common nuances can be noted that require as quickly as possible to remove the chips from the cutting area to prevent as of processing defects of the workpiece so blunting of cutting edges. It is organized by compressed air of the working area.

In General, all the instruments are well up to the task. The drill speed in metal and shaped cutters for milling machine, unify the processing, which increases its speed.

the Use of diamond tools achieves excellent results in milling and grinding workpieces of wood, MDF, stone, acrylic, glass and metals.